Featured Engines:
15 HP Reid Two Cycle Oil Field Engine older repaint, loose, 8" bore, on 11’ foot long trucks, about 18" clutch, tank cooled
Nova Vertical, 3 HP, carb, fuel pump, loose, some original paint, spark plug, Wico Mag bracket
1-3/4 IHC Mogul Hopper Cooled Engine s#Y8771, original on IHC skid, IHC pulley, carb, partial muffler, original crank with repair, IHC magneto, good hopper, nice greasy original!
Great Projects:
20HP Fairbanks Morse Buenos Ares Engine, tank cool Fairbanks Morse & Company Sucursal Sud Americana Buenos Aires Fairbanks Morse Oil Engine, Type Y, 20HP, No.173110, 350 RPM, stuck, cylinder 173110, loose Madison Kipp Lubricator 2 feed model 50, good flywheels, welding on head, Wico type OC no.42594 magneto, about 29" clutch pulley-stuck- no hand wheel
Fairbanks Morse Buenos Aries Engine size unknown, 30 HP?, tank cooled, no tags, head no. 371489H2588, cylinder no.027240, incomplete, stuck& repaired Madison Kipp Oiler, 60" flywheels
Ruston Buenos Ares Engine, tank cooled No. 133274, Size No. 4 Class M, stuck, partial Bosch magneto with arm, some original paint, piston, mains, rod & cap, counter weights, good flywheels, partial pulley with broken casting, about 8 inch bore, about 54" flywheels
Root & Vadervoort 3-1/2 HP - Argentina Engine # BL19330, old repaint, loose, hopper cooled, spark plug convert
Root & Vadervoort, 5HP?- Argentina Vertical, tank cooled engine, 5HP?, loose, incomplete, spark plug
International Harvester:
IHC 4 HP Parts Engines G762 on base, crankshaft, 1 main cap, broken governor weight, good cylinder, sub base, one flywheel has been converted for wood splitter
IHC 4HP Hopper Cooled Engine RE256E, stuck, cracked & welded head, welded rocker, welded rocker stand, welded carb, spark plug conversion, good hopper, stuck, mains, rod, piston, rod cap with bearings, includes an eccentric casting, governor weights, timing gear, good gearing, brass fuel pump, 14 inch clutch pulley-stuck-6.5 inches wide, subbase G762
IHC 4HP Hopper Cooled Parts Engine hopper, flywheels, base, subbase, stuck, piston crankshaft, mains, rod and cap, old repaint, good hopper, 12" IHC pulley with holes drilled for belting-8.5" wide
IHC Tom Thumb Parts Engine stuck, head, base, cylinder, flywheels, 1 flywheel has piece broken out of hub, TG, broken timing gear cover, 1 governor weight
International -1 HP Engine hopper cooled, carb, gas tank, original, unrestored, stuck, spark plug conversion, broken head, cream separator guard?
International 4 HP Engine #SC2275E, #G762 on base, hopper cooled, no igniter, stuck, carb, rocker holder welded, welded head, welded timing gear boss on crank case, sub base, pulley G678 13" wide and 16" diameter
International Mogul 2-1/2 HP Engine #CZ2607, broken crankcase, no mag, repaired rocker, hopper cooled, 8" pulley, igniter, carb, stuck
International Mogul 2-1/2 HP Engine #CZ4084, mag, stuck, broken tag, broken band on mag, broken assembly, no head, parts engine, 12" pulley
International Mogul 2-1/2 HP Engine #CZ4068, parts engine, on stuck, broken crank case, hopper cooled, no head, no igniter, wheels are 16", one wheel is bent, no piston, no rod
2-1/2 HP Hopper Cooled International Engine G6824, broken head, good detent parts, good hopper cooled cylinder, 1 main cap, piston with broken rod, stationary base, Some Great Parts!
2-1/2 HP IHC Mogul Parts Engine CZ2565, welded push rod casting, tag, 7" pulley, governor weights, broken carb, rocker arm, breather, timing gear, modified speed control for governor
2-1/2 HP Mogul Parts Engine CZ2312, includes: base, tag, mains, crank shaft, governor weights, good flywheels, loose
Large Selection of International, LB 1.5 to 2.5 and 3.5 to 5 engines
Large Selection of International M, 1-1/2 HP engines
Large Selection of International M, 3 HP engines
Fairbanks Morse Engines:
Fairbanks Morse 10 HP Z Engine #194001, hopper cooled, carb with broken cover, repaired rocker arm, igniter with mag bracket, no mag, crank case cover, stuck, governor bracket welded
Fairbanks Morse 10 HP Z Engine #206362, tank cooled, spark plug, welded head, original, unrestored, broken casting on bottom of cylinder head
10 HP Fairbanks Morse Hopper Cooled Engine homemade tin hopper, Madison Kipp 6 feed lubricator on front, carb, rocker arm, rocker arm holder welded on head, governor weights, timing gear, igniter with mag bracket, crank guard, 20" pulley, stuck, mains, rod and cap, fuel pump
6HP Fairbanks Morse Z Hopper Cooled Engine holes drilled in top of hopper, carb, repaired rocker arm holder, repair to carb, with mag bracket, stuck, 9.5" planetary gear
3HP Fairbanks Morse Style C Self Oiling loose, unrestored, carb, Fairbanks Morse Mag, spark plug, hopper cooled
Fairbanks Morse ZC, 10 HP Engine radiator cooled, #346, 350-575, rocker arm broken, extra rocker arm & stand & pushrod included, natural gas, loose, v belt clutch pulley, magneto (CCA FBM), original, unrestored
Fairbanks Morse, 2HP Vertical tank cooled, original, unrestored, loose, carb, igniter, cracked water jacket, repaired rocker arm & bracket, loose
3HP Fairbanks Morse Z on cart 160376, stuck, good head & hopper, tractor magneto, with original Fairbanks Morse crank, good timing gear, 9.5" pulley, cart has 12" diameter wheels, cart measures about 31 inches long and 11-1/4 inches wide, nice little engine cart!
3HP Fairbanks Morse Type EV Hopper Cooled stuck, repaired rocker arm and rocker arm stand, Ford automotive carb, modification to hopper for coil
Fairbanks Morse 5-1/2" bore Hopper Cooled Engine carb, muffler, original hand crank, stuck, spark plug, old repaint, 12" pulley, 12-1/2" gear on flywheel, modified fuel tank on hopper
Fairbanks Morse Parts Engine Disal 118, 350 to 700 RPM, stuck, automotive radiator, Jones Foundry Chicago Clutch, incomplete clutch, Fairbanks Morse mag, broken rocker, partial carb
4HP Fairbanks Morse H, Hopper Cooled cylinder about 5" bore, some original paint, cracked cylinder wall on inside hopper, good head, bent valve
Fairbanks Morse Eclipse Engine vertical, hopper cooled, pump jack engine, unrestored, original, carb, stuck
Large Selection of Fairbanks Morse Z, 3HP, hopper cooled engines
Large Selection of Fairbanks Morse Z, 2HP, hopper cooled engines
Large Selection of Fairbanks Morse Z, 1-1/2 HP, hopper cooled engines
John Deere Engines:
RV 4 HP Hopper Cooled Cylinder & Head, 4" bore RV type D, John Deere Plow Company, CL51067, partial carb, cracked cylinder on bottom, piston & rod, 1 rod bearing, modified bracket on cylinder
John Deere 3 HP, Type E, some original paint, loose, igniter, muffler, carb, magneto
John Deere, 3 HP Engine unrestored, stuck, igniter, rocker broke, carb, magneto, muffler
Large selection of John Deere 1-1/2 HP engines
Massey Harris:
Massey Harris, Type 2, 6 HP #6K2680, carb, crank case guard, spark plug, 12" pulley, hopper cooled
Massey Harris, Type 2, 6 HP #6K138, hopper cooled, spark plug, 14" Massey Harris pulley
Massey Harris, Type 2, 3HP #3K1160, hopper cooled, spark plug, carb, 7.5" pulley
Other Engines:
Alpha 1-1/2 HP hopper cooled, unrestored, spark plug, solid flywheel
Stover 2 HP unrestored, loose, Wico, spark plug, carb, on engine cart
Cushman, 3HP, hopper cooled, Wico, loose, old repaint, carb, spark plug, pulley
Cushman, 2HP Sears & Roebucks, hopper cooled, carb, loose
Sattley Montgomery Ward, 1-1/2HP, hopper cooled, old repaint, spark plug
Associated, Hired Hand, 2-1/4 HP, old repaint, loose, hopper cooled, carb
Empire, 1-1/2 HP, Cockshutt Plow Company, unrestored, loose, carb, pulley
Alpha Type F, 1-1/2, hopper cooled, carb, pulley
Lister 3-1/2 HP Vertical with 15 KW Generator #49767, cracked water jacket, spark plug, tank cooled, carb, RA, original, unrestored, loose
Vertical Monitor pump jack engine, hopper cooled, battery box with no lid
Macleod 5 HP #6491, hopper cooled, original, igniter with bracket, 14" pulley,
Stover, 2-1/2 HP, hopper cooled, carb, igniter, 6" pulley
Monitor 1-1/4 HP Vertical, Type VJ, hopper cooled, pump jack engine
Worthington Pump & Machine Co., 3 HP, Type W, #19523, igniter, mag
Eclipse vertical, hopper cooled, pump jack engine, unrestored, original, carb
Fuller & Johnson air cooled pump jack engine, early style, partial carb, unrestored, loose
Alpha, Type D3, W 1-1/2HP, hopper cooled, carb, spark plug, crank guard, gas tank
Fairmont Two Cycle Rail Car Engine, loose, carb, hopper cooled, unrestored
Waterloo 2-1/2 HP #85219, hopper cooled, gas tank, igniter, 10" pulley, unrestored
Witte 3HP #102881, carb, hopper cooled, 5" pulley, no mag, spark plug
Associated 6 HP #602890, igniter, stuck, hopper cooled, no carb, 15" pulley, mag
Call of the West, 9 HP Call of the West, hopper cooled, 15” clutch pulley (8 HP No.1), Webster magneto, igniter, no carb
Waterloo 4-1/2 " bore 12" pulley, hopper cooled, carb, Webster mag & igniter
Vertical R. A. Lister hopper cooled, partial mag, 6" pulley, incomplete, partial carb
Galloway 6 HP, igniter, 1-3/4" lunkenheimer carb, hopper cooled, 16’ pulley, sub base
Associated 6-3/4" bore original, fuel tank & brackets, crank guard, muffler, no carb
Economy 5 HP #102892, Webster magneto, carb, about 12" pulley, hopper cooled
Stover 6 HP #X68698, carb, igniter, Webster bracket, hopper cooled, fuel pump, unrestored
Economy 1-1/2 HP #181172, Webster mag, igniter, carb, hopper cooled, 4" pulley
New Way Vertical Air Cooled, Model#6595, old repaint, spark plug, 8" pulley
Cushman Vertical, tank cooled, on trucks, includes water tank, loose, Schebler carb
5HP Ottawa Saw Engine with Cart & blade #TE25388, spark plug, carb, hopper cooled, 60” saw with eccentric, unrestored
Ontario Wind Engine & Pump Company 3 HP #3504, carb, muffler, Webster mag, igniter, crank guard, hopper cooled
Witte 3 HP #84108, carb, spark plug, fuel tank, 5” pulley, hopper cooled
Economy 5 HP, hopper cooled, crank, no igniter, carb, unrestored, 12” pulley
New Way Vertical air cooled, old repaint, loose, magneto, carb, spark plug, 6” pulley
Farm Master, Sears & Roebuck, 2HP, Model 811-2, Wico, loose, carb, hopper cooled
Galloway, 6HP, fuel tank, 1-3/4" Lunkenheimer carb, igniter, tin crank guard, hopper cooled
Waterloo Style, 5-1/2" bore, igniter, 1-3/4" lunkenheimer carb, 18" pulley, hopper cooled
Parts & Parts Engines:
Cylinder for Hopper Cooped Mogul Side Shaft, 6HP 5" bore, #6535-TA, no cracks, good condition; IHC 4HP parts engine; IHC 6HP base & sub, hopper cooled cylinders for IHC engines; Waterloo Style hopper and parts engines, John Deere parts engines, International M parts engines, Fairbanks Morse Parts Engines; Goold Shapley Muir, Vertical 1-1/2 HP; International Mogul 2-1/2 parts engines; Economy 7HP; Associated 2-1/4 HP parts engines; 7HP Economy Flywheels; Mogul Side Shaft base with partial side shaft; & more!
<br>
<br>
Terms:<br>
<br>
1. Catalog: Aumann Auctions has put forth every effort in preparing the catalog for this auction to provide accurate descriptions of all items. All property is sold 'as-is' and it is the bidder’s responsibility to determine the exact condition of each item. Printed statements or descriptions by staff are provided in good faith and are matters of opinion.<br>
<br>
<br>
2. FOR ABSENTEE BIDDING ON AUMANNAUCTIONS.COM: There is a 5% Buyer's Premium added to your total purchase.<br>
<br>
<br>
3. Payments: All accounts must be settled at the conclusion of the auction. We accept Visa & MasterCard ONLY. Your credit card will be charged for your purchases, plus buyer’s premiums, and any taxes. A pre-auction authorization will be performed to establish available credit. Debit cards may show a hold on funds for a short period of time. NOTHING will be charged to your card until a purchase is made. Each transaction necessary to collect insufficient funds will have a $25 fee imposed. Note: Checks may be processed the day of the auction; be sure to have adequate funds in your account.<br>
<br>
<br>
4. Pickups: see term #14<br>
<br>
5. Shipping: N/A for this Auction<br>
<br>
6. Missing Items: N/A for this Auction<br>
<br>
7. Storage: A minimum charge of $10 per week storage fee for items that are held over 14 days. In addition to the storage fee, the buyer is still responsible for paying labor costs to prepare your items for pickup.<br>
<br>
8. Live Internet Bidding: N/A for this Auction<br>
<br>
<br>
9. Registration: In order to better serve our customers, all bidders must provide their name, address, daytime phone number, and email address at which they can be contacted. This is to insure good communication between Aumann Auctions, Inc. and the bidder throughout any transactions. <br>
<br>
<br>
10. Unpaid Balances: The purchaser agrees to pay all reasonable attorney fees and costs incurred by the auction company in the collection of funds. The purchaser also agrees that a fee of 2% per month be added to the balance of any unpaid balance due the auction company and any other costs or losses incurred by the purchaser’s failure to adhere to these terms. Any debt collection or dispute proceedings will be heard in Montgomery County, Illinois.<br>
<br>
<br>
11. Bidding: The auctioneer has the sole discretion to advance the bidding and may reject a nominal advance, should it in his estimation prove injurious to the auction. The auctioneer shall be the final judge in all bidding disputes and shall name a bidder as the purchaser. The auction company shall not be held responsible for any 'missed' bids or bids unseen by the auctioneer. By bidding on any item, the bidder shows acceptance of the terms of the auction.<br>
<br>
<br>
12. All sales are final.<br>
<br>
<br>
13. The auction company reserves the right to refuse service to any person. All announcements made day of auction take precedence over any and all written or verbal statements.<br>
<br>
14. All items must be removed from premises within two weeks or storage charges will apply. Any item left is at the buyer’s risk. The owner or auction company assume no risk.